If you need to change the units stick mode or configure different effects for the actuated stick assemblies then the Stick Setup section should be the one to use.
By altering the settings related to the Main Unit actuated Sticks, additional functionality may be enabled or disabled. Please read these descriptions carefully before making alterations to your setup. Alteration of options is just as simple as alteration of numbers, mentioned in the User Interface General Description By using the Left or Right functions, a selection can be made. To confirm the settings, the Enter function must be activated, which will display a confirmation window.
Mode
Since each stick axis on the Main Unit can be actuated and thus, simulate features such as Spring Return or Ratchet Effect, choosing a Control System with the appropriate Mode is no longer an issue. By changing the Mode, most importantly, the Throttle stick shall act...
OSRC Blog
Welcome to the OSRC Blog section. Anything and everything related to OSRC can be posted by any member of the community. Feel free to post content about your project, documentation, additions to OSRC or general thoughts.
Root Menu
We begin the description from the Root Menu. Before setting up anything related to your model, there are many customizations and functions that must be properly configured to suit your equipment best as well as incorporate your own look and feel into the unit.
- Subscribe to this category
- Subscribe via RSS
- 8 posts in this category
If you need to add more models to your system or alter existing ones, then the Model Settings menu contains all that is necessary to achieve it.
Once in the Model Settings, a list of available models shall be presented. To Select a model from the list, use the Enter function. To edit a model, use the Select function.
To delete a model use the Delete function and to add a new model, naturally use the Add function. Note that only the selected model shall be altered.
Please read the below descriptions carefully before making alterations to your setup.
Model Settings
The Model Settings menu consists of 2 pages, with 5 options on each one. Below you shall find the description for each page.
Name
To properly name your model use the Select function and alter the text as described in the User Settings section. The name of the model shall...