Due to the versatile communication options available on-board the Main Unit, it is possible to create friends and list them for sharing Real Time Stick movements, record them, become a Co-Pilot and achieve many other actions with multiple friends at the same time. Once inside the Friend List menu, a list of all the Friends you have added to your device shall appear. To add a new Friend the Add functions is used. Once triggered, OSRC shall begin searching for available OSRC units within the RF range. Once found, a notification window shall appear, asking both the operator and the remote unit to confirm the connection. Once a connection is established, the list shall be refreshed and the Call Sign of your friend will be displayed. All settings related to the Friends unit will be automatically transferred and stored on-board the operators unit for future use. Deleting a friend can be...

Among many great features, assigning switches, buttons and other input devices to different functions is one of the many reasons for defining OSRC as a Fully Customizable system. Find out how to assign Functions to an input device as well as which functions are available in the latest firmware. Once inside the Switch Settings, a list of all available switches, buttons and pots will be displayed. This list is directly linked to the options defined in the OSRC Accessories sections. Based on the amount of input devices, the list may be as large as 2 pages and contain not only switches or buttons but also Pots and Sticks. Each switch, button or pot is marked with the corresponding name, near every location of the input device. For example a switch on the Left Shoulder module can be marked as LS1. To navigate through the list, functions Up, Down, Left and Right...

If you need to change the units stick mode or configure different effects for the actuated stick assemblies then the Stick Setup section should be the one to use. By altering the settings related to the Main Unit actuated Sticks, additional functionality may be enabled or disabled. Please read these descriptions carefully before making alterations to your setup. Alteration of options is just as simple as alteration of numbers, mentioned in the User Interface General Description By using the Left or Right functions, a selection can be made. To confirm the settings, the Enter function must be activated, which will display a confirmation window. Mode Since each stick axis on the Main Unit can be actuated and thus, simulate features such as Spring Return or Ratchet Effect, choosing a Control System with the appropriate Mode is no longer an issue. By changing the Mode, most importantly, the Throttle stick shall act...