Not all trims are accessible through the dedicated Trim knobs on the Main Unit. To find out how to trim other channels, read this section of the blog. Sub Trims can be thought of like the center offset values for each channel. If a motor or another output device on a model needs its center to be offset then these are the values that must be altered. The only difference of this section from the Trims section is that the operator can define the exact value, necessary for each of the remaining channels. Channel The amount of channels available for trimming is directly associated with the total amount of channels defined within the Root Model Settings. Since the first 4 channels are controlled through the Trims section, this section can define trim values for the rest of the channels. Trim By selecting the value associated with the corresponding channel, the operator...

Besides the already available, dedicated Trim knobs on the Main Unit, the operator can also define the values as well as their incremental rate through these settings. Trims can be thought of like the center offset values for each channel. If a motor or another output device on a model needs its center to be offset then these are the values that must be altered. Values altered in this section, are also controlled by the Trim Levers located near each Main Stick axis. The only difference of this section is that the operator can define the exact value, necessary for each of the 4 main channels. Channel 1 - 4 By selecting the value associated with the corresponding channel, the operator may define a negative or positive offset value. The channel association to each Main Stick axis is relevant to the corresponding Mode selected within the Root Stick Settings Mult/ier -...

Find out how to reverse a channels value through these settings. We guide the operator through the steps required in order to reverse a channel with few easy presses of a button. This section is by most part, self explanatory. The settings defined here shall determine the appropriate direction in which the values shall be transmitted to the model. Channel This option defines which channel shall be modified. When selected, the appropriate values will be refreshed and become ready for alteration. The amount of channels available in this section is directly linked to the amount of channels selected in the Root Model Settings State This option has only 2 available states. The first one is Normal and the second one is Reverse. By choosing the appropriate option, the values shall flip accordingly as will the output devices on the model being controlled....