OSRC Blog

Welcome to the OSRC Blog section. Anything and everything related to OSRC can be posted by any member of the community. Feel free to post content about your project, documentation, additions to OSRC or general thoughts.

  • Αρχική
    Αρχική Εδώ μπορείτε να βρείτε όλες τις καταχωρήσεις blog που περιέχει η ιστοσελίδα.
  • Κατηγορίες
    Κατηγορίες Εμφανίζει μια λίστα κατηγοριών από αυτό το blog.
  • Ετικέτες
    Ετικέτες Εμφανίζει μια λίστα των ετικετών που έχουν χρησιμοποιηθεί στο blog.
  • Συντάκτες
    Συντάκτες Αναζήτηση για το αγαπημένο σας blogger από αυτό το site.
  • Ιστολόγια ομάδας
    Ιστολόγια ομάδας Βρείτε τις αγαπημένες σας ομάδες blog εδώ.
Πρόσφατες δημοσιεύσεις στο blog

Seasons - The story behind it

Αναρτήθηκε από σε σε 3D Printers

snapshot.jpgWhen i begun working on the Ilios HD Kit i knew that the first model i was going to build with it had to be something special. There are tons of generic models out there which initially were made for simple extrusion type 3D printers and their resolution was quite low to begin with.

A custom model was needed, which was tailored for the Ilios Kit and would demonstrate its capabilities to the max. Simple solid objects are easily recreated since minimal supports are required and the model does not go through any stress while it is being built. I needed something that would be complex not only in terms of resolution, but in its shape as well, having twists and turns, which could make any software with automates supports inadequate.

Designing something creative isn't easy and definitely requires skill and talent. As a 3D designer i browse through most known channels where news about latest software and model innovations are posted. One of those posts cough my attention, which demonstrated the use of holographic 3D model presentations in a unique way and was called Rabbit Holes.

Επισκέψεις: 10387 0 Σχόλια
Συνεχίστε την ανάγνωση

Ilios HD SLA 3D Printer Build

Αναρτήθηκε από σε σε 3D Printers
Based on the successful campaign on IndieGoGo to raise funds for an HD SLA 3D printer i shall be describing the build process of the first unit in this blog so that others can see it, comment on it and perhaps even learn something from it. Since the campaign ended i immediately begun preparing all the part lists to order and finalized as well as tweaked the design for a better look and performance. As time goes by i shall be adding my progress to this blog for everyone to see and describe what i am doing in detail. Feel free to discuss the build in the Forum or comment on the blog it self. This should be quite enjoyable for me and a good break from OSRC development for a while so sit back and enjoy the build with me. If you want to find out how the 3D printer...
Επισκέψεις: 24514 4 Σχόλια
Συνεχίστε την ανάγνωση

Which configuration suits you best

Αναρτήθηκε από σε σε General
what-suits-you.jpg
Due to the modular nature of OSRC, the possibilities while combining different modules, become endless. Each module has its purpose and can add features related to many different fields. Sometimes the operator may need additional switches, other times additional data may be required. If just flying for pleasure, an advanced computing unit with a color display may not be needed, while flying with an FPV setup, the additional control of a camera or Real-Time video preview can be achieved. You may already have a set of traditional receiver units which are integrated into your model and just need a reliable control unit to go with it, adding all the great advantages that OSRC can offer. In all cases, the user can change one module for another, maintaining the ability to cover all possible scenarios and at the same time build a rich collection of hardware upgrades for the OSRC control system....
Επισκέψεις: 16923 6 Σχόλια
Συνεχίστε την ανάγνωση

Πιο σχολιασμένα

OSRC Development & Manufacturing
RC Projects

"Thank you for the feedback Hunter. Yes, you absolutely can."

Figure_main_unit_front.png
Main Unit External Features
External Features

"Thank you. Really appreciate the feedback. Will do my best not to disappoint :)"

Creative Commons License

 

OSRC από rdGizmo For You LTD λειτουργεί υπό την Αναφορά Δημιουργού - Μη Εμπορική Χρήση - Παρόμοια Διανομή 3.0 Μη εισαγόμενο

Ακολουθήστε μας

Supported By