• FliteTest Interview

    FliteTest was kind enough to talk to Demetris (Creator of the OSRC System) about the features of the system and at the same time answer some of the questions that were gathered throughout the RC community. Chad and Josh talk about features such as RF Cloud, modularity of the whole system and why it was important to have these and many other unique features in a single project.

    Although the video does not fully explain all features, it gives a great opportunity to meet Demetris and get an overall idea about the history of the project and its future through the eyes of the creator.

    Feel free to browse through other videos on the OSRC YouTube channel to find out more about the system or head to the Forum with your own questions or suggestions.

    Don't forget to check out the OSRC Facebook site as well, where many news and daily updates take place while working on different features of the system. Post your comments there as well, like the site and contribute to the effort.



  • Detailed Description

    In this video the designer of the OSRC (Open Source Remote Control) system goes through all major features and talks about the benefits they hold. The video was mainly created to address most of the questions that gathered through the OSRC as well as other forums, comments on YouTube, E-mails and other social media.

    Although it was impossible to describe the entire system in a single video, most functions, hardware accessories and the over all details are described in this presentation, giving a more complete understanding of how the OSRC system works and why it is important.

    You can read more about specifications and features each module of the system has in the Products section of the website. For more videos don't hesitate to visit the OSRC YouTube channel.




Previous
Next
OSRC Sources 1

  • OSRC Sources

    Although i suspended the project, i still get E-mails every day about information regarding OSRC and its designs. Although it is sad to see that even in the year 2016 there are very few equivalent systems (if any) since the day i designed this prototype which was almost 6 years ago now. Since i started this project as an Open Source initiative, it only feels natural that i end it as

    Read more...
OSRC is suspended 2

  • OSRC is suspended

    Dear all, unfortunately despite my efforts to gather the funding required for manufacturing OSRC, through the last IndieGoGo campaign, i am suspending the project and moving on. It was a great experience and truly a massive effort on my part to bring what i still believe to be a unique and innovative remote control system to the masses. The project was complex and yet provided everything any RC user may eve

    Read more...
Ilios Website & OSRC IndieGoGo Campaign 3

  • Ilios Website & OSRC IndieGoGo Campaign

    I would like to inform all Ilios 3D printer customers that the Ilios website, Shop and other content has been moved to its dedicated website. This is done to separate the Ilios content from OSRC and not to confuse Ilios users. Please note the new Ilios website which is http://www.ilios3d.com

    Read more...
Shop Discount and a new Facebook Page 4

  • Shop Discount and a new Facebook Page

    To separate the Ilios 3D printer from the OSRC project and make things more organized, a dedicated Facebook page for our Ilios 3D printer was created. I re-posted everything related to Ilios, starting from the time it was being designed up to

    Read more...

6 - Projector Mount 1 Assembly

Share

The final section we need to assemble, is the projector mount. Besides the function of the actual projector mount, it also adds additional stability and structure to the entire lower section of the machine. All components that you need for this part of the assembly are included in the kit, so go through these instructions carefully and note the correct orientation of parts and assembly procedures.

Step 1  

1 x Projector Support Front

1 x Projector Support Back

1 x Projector Support

1 x Universal Projection Mount

1 x Nuts & Bolts Bag
Please make sure you have all components as shown on the image above, before you proceed with this assembly. It is important that all parts are close by and available once you begin putting everything together.  
 Step 2  
 Locate the Front and Back supports but don't screw them together yet.  This demonstration shows how the mount should be fastened after it is in the machine. This image is purely for reference.
   Step 3
 The above image demonstrates how the final mount should look like. Please note that the mount should NOT be assembled yet. Follow next steps to find out how to proceed. Locate the Corner brackets and the Longer and Shorter 6mm headless bolts. Note that each bracket has ONE Short and ONE long bolt. 
   Step 4
 Slide the brackets into the slots on the feet of the machine. Note that the SHORTER bolt should be facing the slot and the LONGER bolt should be outside. This image demonstrates how the Projector support should fit into the brackets. Note the orientation of the bracket since you shall be sliding the support into the slots.
 Step 5  
Begin sliding the support into the slots. Make sure that the LONGER bolt of the bracket is going inside the support since this is the one that shall be holding the support in place.  Level the support and tighten the bracket bolts. You may need to pull or push the fee together or apart to make this fit but once done, everything should be nice and level.
   Step 6
 This is how the Projector Support should look like when complete. Note that you need to go through the same process on the other side of the machine as well.  Once both sides are in place, you can bolt on the Projector support cross section. Bolt it tight so that everything is properly aligned. Note that the same support has additional brackets which enable you to slide this cross section and not use the bolts as shown in this picture.
Step 7  

Inside the Projection mount assembly you should find two sub assemblies as shown on the image above. These components allow you to move the projection support back and forth on the Y axis for a better alignment of the projection surface.

NOTE: Please note that the bolt holes and the 4 bolts for mounting the Projector Support are provided in case you need to mount 2 projectors and the holes are centered to help you center your mount.

 This image demonstrates how the 2 sub assemblies should be fitted. Releasing the left side shall give you the advantage of moving the projector up and down as needed to align it with the VAT, since most projectors tend to offset the image and not project it directly in front of the lens.
 Step 8
  NOTE
 This image demonstrates one option of mounting the Universal projector mount. Since most projectors have 3 or 4 mounting points, the mount it self can be extended or shortened accordingly.

This image demonstrates the assembly of the Universal Projector mount. If you are inventive enough, you may find other ways of mounting your projector besides what is mentioned in these instructions.

For more information on the recommended fitting of the projector mount, please consult the Projector Mount Fitting tutorial.

Congratulations! You have successfully assembled Ilios. It was a bit tough i know, but definitely worth it. Make sure to post images of your build in the Forum and discuss any questions you may have with other Ilios owners there. As always, if you have any questions, you can also contact us directly.

Γράφτηκε από τον/την Demetris Zavorotnitsienko

Τελευταία θέματα

  • Δεν υπάρχουν δημοσιεύσεις προς εμφάνιση

Τελευταία σχόλια

Το Τβίτερ μας

by acls us

Το Φέϊς Μπουκ μας

Creative Commons License

 

OSRC από rdGizmo For You LTD λειτουργεί υπό την Αναφορά Δημιουργού - Μη Εμπορική Χρήση - Παρόμοια Διανομή 3.0 Μη εισαγόμενο

Ακολουθήστε μας

Facebook

YouTube

Twitter

Supported By