Blogs i write are mostly related to OSRC in one way or another, may it be a user manual, tutorial or something interesting for the reader. Since i developed the OSRC system, naturally writing information about it is my main priority. However now and then i do tend to write my own thoughts about other topics, related to technology.

  • Home
    Home This is where you can find all the blog posts throughout the site.
  • Categories
    Categories Displays a list of categories from this blog.
  • Tags
    Tags Displays a list of tags that has been used in the blog.
  • Bloggers
    Bloggers Search for your favorite blogger from this site.
  • Team Blogs
    Team Blogs Find your favorite team blogs here.

FPV Settings

Posted by on in Root Menu
  • Font size: Larger Smaller
  • Hits: 4866
  • 0 Comments
  • Print

Specifically designed for FPV functions, this menu will provide you with the ability to alter settings such as Video Channel, Thumb Stick functionality and others. All designed to accommodate the FPV features OSRC can provide.

Ui_root_fpv_settings.png

The FPV section of the User Interface is dedicated to settings that control main functions of the Basic FPV setup. Through the settings described below, the operator may change how the FPV setup is configured and how functions related to it are presented.

RX Chan-N - Video Receiver Channel Number

If an FPVC Basic or Advanced module is present on the system and is properly configured through the OSRC Accessories menu, the operator shall be presented with the option to choose the channel on which the Video and Audio shall be received. The Video and Audio receiver located on both modules can function on 8 different channels for which the corresponding frequencies are:

Channel NumberFrequency in MHz
15705
25685
35665
45645
55885
65905
75925
85945

Thumb St. - Thumb Stick Attitude

Both FPVC Basic and Advanced modules come with 2 Analog Thumb Sticks, which can be moved on both X and Y axises. The Stick Attitude option can define how these sticks should behave if they are configured for camera control or similar device.

BehaviorDescription
AsStickIn this mode, the position of each axis is proportional to the motion produced by the corresponding channel. This means that the Camera or motor shall move exactly as the stick does and will return to its center position once released.
PosHoldIn this mode, the position of each axis is not proportional to the motion produced by the corresponding channel. When the stick is pushes to a corresponding direction, the Camera or motor shall move until the stick is released. Once released, the motion shall stop and although the stick will come back tot he center position, the motor shall remain where it stopped. This will continue to happen every time the stick is activated until the Camera or motor reach their final position.
0

Have been working with electronics for as long as i can remember. Always enjoyed making something new and having the pleasure of seeing it work at the end. One of my latest and i must say, greatest creations is OSRC - Open Source Remote Control. Finally i can work on a single project, devote my full attention towards it and improve it as much as possible, with help from the RC and general Open Source community.

You have no rights to post comments. Please Login or Register

Most Commented

OSRC Development & Manufacturing
RC Projects

"Thank you for the feedback Hunter. Yes, you absolutely can."

Figure_main_unit_front.png
Main Unit External Features
External Features

"Thank you. Really appreciate the feedback. Will do my best not to disappoint :)"

Creative Commons License

 

OSRC by rdGizmo For You LTD is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License

Supported By